imagistics 5000 Operating Manual page 67

Basic operation
3
Press the Macro key ( 1,
M
The shows:
LCD
Macros
Title Lower Case
Copy 1_
4
Enter the new title by using the numeric keypad. (If necessary, review
"Entering characters", page 1.12)
5
Press to save the setting.
ENTER
Copying with the Macro key
To copy using a Macro key:
1
Insert the document.
2
Press the Macro key in which you've stored the copy command.
3
Press , if you have not programmed
START
Printing lists using the Macro key
To print a list using a Macro key:
1
Press the Macro key that is programmed for printing the lists.
2
Press , if you have not programmed
ENTER
Storing fax documents with the Macro key
To store a fax document for either polling or F-Code polling using a Macro key:
1
Insert the document.
2
Press the Macro key that is programmed for the storing operation you want
to use.
3
Press , if you have not programmed
ENTER
3.20
2 or 3) you want to change. Then press
M M
in the Macro key.
START
in the Macro key.
ENTER
in the Macro key.
ENTER
Fax dialing with the Macro key
.
ENTER
To dial a fax call using a Macro key:
1
Insert the document.
2
Press the Macro key in which you've stored the fax communication com-
mand.
3
Press
START
Your fax will perform the operation now, or at the time you programmed.
If you programmed this key to delay its operation, the
Ready to Fax Ready to Fax
Sep 25 2001 11:00am Sep 25 2001 11:00am
If you programmed this key to perform the operation immediately after you press it,
the shows the number:
LCD
Press START Key Press START Key
972-555-4335
LTR LTR
Erasing a Macro key
1
Press
MACRO PROGRAM
Macros Macros
Enter Macros Enter Macros
Erase Macros Erase Macros
Macro Speed Macro Speed
2
Select "Erase Macros" and press
Macros
M01: Trumbull
M02: Copy 10
M03: Not stored
, if you have not programmed
START
Reserved Reserved
Mem: 99% Mem: 99%
Normal Normal Normal Normal
[ Mode ][ Contrast ] [ Mode ][ Contrast ]
Normal Normal Normal Normal
[ [ Mode Mode ] [ Contrast ] ] [ Contrast ]
. The shows:
LCD
Change Title Change Title
. The
ENTER LCD
in the Macro key.
shows:
LCD
shows: