imagistics 5000 Operating Manual page 73

Basic operation
5
Enter the fax number for the remote fax to which you want documents to be
transferred. Use either a one-touch number or a speed-dial number.
You can specify up to 20 numbers for transferring.
Note: If you enter characters by mistake, press
Note: When the Remote copy feature is set to "ON", the assigned one-touch
or speed-dial number will be not able to be edited. Please change this
function to "OFF" when you want to edit the fax number.
6
Press . The will show:
ENTER LCD
16. Remote Copy
Exit
Forwarding Mode : Tx Doc.
# of Redials : 002 times
7
Select "# of Redials" and press
16. Remote Copy
# of Redials ( 000-127 ) : 002 times
8
Use the numeric keypad to enter the number of redials you want.
If you want to override the 127 limit in order to keep redialing until the
remote fax machine receives, enter 000.
Note: This redial setting is effective only for the Remote copy feature. It is
not effective for redial attempt of normal communication.
9
Press .
ENTER
If you select "Tx Doc." in step 3, skip to step 16.
Otherwise, proceed to step 10.
10
Select "Auto Print" and press
16. Remote Copy
Auto Print
ON
OFF
Automatic printing determines whether the machine will print a document
automatically upon receiving it:
ON: A copy of every received document is printed at your machine. Then
the machine will transfer the documents to the specified fax machine.
OFF: Received documents are not printed at your machine. The machine
transfers the documents after the reception is completed.
3.26
to clear them.
CANCEL
. The will show:
ENTER LCD
. The will show:
ENTER LCD
Note: If the security reception (pages 3.54–3.55) is activating, the machine
dose not print received document regardless of this setting. And the
machine will not transfer it until it is printed out.
11
Select the mode you want, and press
If you select "Rx Doc." in step 3, proceed to step 12.
Otherwise, skip to step 16.
12
If you select "Rx Doc." in step 3, "Time 1" to "Time 7" will appear on the
These are time period settings that the received documents will be trans-
ferred and they can be activated individually.
Note: You must set at least one timer setting.
13
Select from "Time 1" to "Time 7" you want to set and press
ON: Enable to activate this time period setting.
OFF: Disable to activate this time period setting.
14
Select "ON" to activate the time period setting. Then press
The machine asks time period that the machine will transfer documents.
In the following example, we have selected "Time 1":
Start transferring End transferring
day and time day and time
How to enter the day and time:
• To enter the day of the week, press [Day] until the day you want appears.
If you want to transfer the document everyday, select "–".
• To enter the time, use the numeric keypad.
• If you wish to transfer documents at anytime, press [Anytime].
.
ENTER
LCD
.
ENTER
.
ENTER
.