imagistics 5000 Operating Manual page 69

Basic operation
3
If you want to cancel the command shown, press [Erase]. The
Note: If you want to cancel an incomplete job, press
appears. Then press [Erase].
4
To go ahead with canceling the command, press [Yes]. Go back to step 2 to
view other delayed commands.
To keep this command but to continue reviewing stored commands, press
[No]. Go back to step 2.
To keep this command and stop reviewing commands, press
your machine to standby mode.
Reviewing or canceling parts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1
Press . /
COMM CANCEL CONFIRM
2
Press or to scroll through currently stored broadcast command.
Review Commands
Command No. : 05
Broadcast
[ Result ] [ Location ] [ Erase ]
3
When the command you want to cancel shown, skip to step 6.
If you want to review individual numbers within this broadcast, go on to step
4 without pressing [Erase].
4
To review individual numbers within this broadcast, press [Location] to see
the first number. The
LCD
Broadcast ( each location )
Command No. : 05
07 : 555-7890
[ EditLoc. ] [ Erase ]
5
Press or until you find the number you want to cancel.
3.22
until [Erase]
STOP
..
Waiting
shows:
6
shows: Press [Erase], [Yes]. The next number will appear.
LCD
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling other command, press [No].
If you don't want to cancel any more numbers, press
returns to standby mode.
Editing commands
You can add the location, that is, the remote fax number, of the command stored in
your machine. Also you can add some pages to it, if you want.
Note: The following commands are not able to be edited:
• Batch transmission command
to return
• The command waiting for redialing
Adding locations of the stored command
1
Press
2
Press
Review Commands
Command No. : 01
9-234-5678
[ Result ] [ EditLoc. ] [ Erase ]
3
When the command you want to edit shown, press [EditLoc.].
If the command you want to edit is a broadcast, proceed to step 4.
Otherwise, skip to step 6.
Note: If it is a broadcast, press [Location] instead of [EditLoc.].
4
The
LCD
Broadcast ( each location )
Command No. : 05
07 : 555-7890
5
Press [EditLoc.].
6
The
LCD
Add Location
Command No. : 01
_
. / ..
COMM CANCEL CONFIRM
or to scroll through currently stored commands.
30 / 19:00
shows:
[ EditLoc. ] [ Erase ]
shows:
. The machine
STOP