imagistics 5000 Operating Manual page 31

Getting started
20
Press . The will show:
ENTER LCD
9.User Install
TTI 1 Upper Case
-
21
Use the numeric keypad to enter characters. The name may be up to 22 char-
acters, symbols, and spaces in length. Regarding entering characters,
see page 1.12.
Note: If you make a mistake, press
To change just one character in the name, move the cursor by cursor
key. Press
CANCEL
correctly.
22
Press to save the TTI.
ENTER
If you do want to set or change another TTI, go back to step 19.
If you do not want to set or change another TTI, proceed to step 23.
23
Select "Exit" and then press
24
The now asks you to set the default TTI.
LCD
Select the TTI you want to appear usually at the top of faxes you send using
the cursor key.
9.User Install
Select Usual TTI
1:Imagistics
2:Imagistics General dept.
25
Press to save the setting and continue.
ENTER
26
The now asks you to enter the time for the energy saver sleep mode. Your
LCD
machine will now automatically enter sleep mode after your selected idle time
has elapsed.
9. User Install 9. User Install
Sleep Mode (001-240): Sleep Mode (001-240):
After After 005 min.
27
Enter the time (in minutes) using the numeric keypad.
28
Press to save the setting. Your machine will return to standby mode.
ENTER
1.20
to erase to the left.
CANCEL
to erase the character. Then re-enter the character
and continue.
ENTER
05 min.