Using One-Touch Keys - imagistics 5000 Operating Manual

Basic operation

Using one-touch keys

Your fax machine stores up to 56 one-touch numbers using the keys marked 01–56.
Entering or changing a one-touch number
1
Press , 1, 1, 0, 1,
MENU ENTER
01. Enter One-Touch 01. Enter One-Touch
Select One-Touch Select One-Touch
01:No Number Stored 01:No Number Stored
Note: If a one-touch number other than 01 appears on the
that you have already entered a number for 01.
2
Using the cursor key, select the one-touch key in which you want to store a
number or change a previously stored number.
Note: You can also select the one-touch key by pressing that key on the con-
trol panel.
3
Press . The shows:
ENTER LCD
01: 01:
Enter Fax Number Enter Fax Number
-
4
Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever access codes your phone system requires. (You may
want to review "Special dialing characters," page 3.1.) The number can be up
to 40 characters in length:
Your can show only 30 characters at a time. To view characters beyond
LCD
those 30, press to scroll to the left or
5
When the number is as you want it, press
shows:
01:123-4567 01:123-4567
Exit Exit
Location: Location:
3.2
. The shows the empty one-touch number:
LCD
(01-56) (01-56)
LCD
to scroll to the right.
to store it. The
ENTER
6
Using the cursor key, select "Location" and press
01:123-4567
Location Location
-
Note: If a Location
7
Enter the Location
, it means
character" on page 1.12.) A number's Location
in length.
8
Press
ENTER
9
Select "Exit" and press
The
LCD
If you do want to enter another one-touch number, go back to step 2.
If you do not want to enter any more one-touch numbers, press
Use the autodialer labels in your fax's packaging to write down the stored
numbers for easy reference.
Erasing a one-touch number
1
Press
MENU
already entered:
02. Erase One-Touch 02. Erase One-Touch
Select One-Touch Select One-Touch
01 : 123-4567
now
LCD
Note: If the one-touch number that appears is other than 01, it means that
2
Using the cursor key select the one-touch key you want to erase.
Note: You can also select the one-touch key by pressing that key on the con-
Lower Case Lower Case
is already registered in this one-touch key, it is shown
ID
on the . If you wish to change the location
LCD
erase it (multiple times if necessary) and then enter another location
.
ID
. (Regarding how to enter the character, see "Entering
ID
to save the setting.
.
ENTER
will display the next empty one-touch number.
, 1, 1, 0, 2, . The shows the one-touch number you have
ENTER LCD
(01-56) (01-56)
01 is empty.
trol panel or using the cursor key.
. The shows:
ENTER LCD
, press to
ID CANCEL
may be up to 24 characters
ID
to finish.
STOP