Setting Sleep Mode (Energy Saving Mode); Setting Paper Source; Adjusting The Machine's Clock; Setting 2-Bin Tray (Option) - imagistics 5000 Operating Manual

Setting Sleep mode (Energy saving mode)

Default setting: On
Note: All lamps on the control panel will not be off, even when the machine is
LED
in the sleep mode.
If you want to change the Sleep mode to OFF, you can set it here.
1
Press , 2, 1, 0, 5, . The
MENU ENTER
ON ON
OFF OFF
2
Using the cursor key, select the mode you want.
Then press to save the setting.
ENTER

Setting paper source

Default setting: 1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
1
Press , 2, 1, 0, 8, . The
MENU ENTER
08. Paper Source 08. Paper Source
Exit Exit
1st Cassette 1st Cassette :Fax / Copy :Fax / Copy
Bypass Tray Bypass Tray :Fax / Copy :Fax / Copy
2
Select the item you want to change the setting using the cursor key and then
press . The will show:
ENTER LCD
08. Paper Source 08. Paper Source
Not Used Not Used Fax / Copy Fax / Copy
Fax
Copy Copy
3
Select "Fax/Copy", "Fax" or "Copy" as you want. Then press
"Fax/Copy": Select this if you want to use the paper source you selected for
faxing, list (or report) printing and copying.
"Fax": Select this if you want to use the paper source you selected for
faxing and list (or report) printing.
"Copy": Select this if you want to use the paper source you selected for
copying only.
"Not Used": Select this if you do not want to use the paper source you
selected.
shows:
LCD
shows:
LCD
.
ENTER
If you want to change another setting, repeat steps 2 and 3.
If you do not want to change any more settings, proceed to step 4.
4
Select "Exit" then press
ENTER

Adjusting the machine's clock

You can adjust the machine's clock here.
1
Press , 2, 1, 0, 7, . The
MENU ENTER
07. Date & Time 07. Date & Time
Enter Current Date and Time Enter Current Date and Time
09/27 2001 14:30
Note: Enter the time using the 24 hr method. (e.g. 2:30pm = 14:30)
2
Use the numeric key to enter the current date and time to adjust the clock.
Then press .
ENTER

Setting 2-bin tray (Option)

Default setting: Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray
You will set where the printed paper emerges in this operation.
Note: This operation will appear only if the optional 2-bin tray has been attached
to your machine.
1
Press , 2, 1, 1, 0, . The
MENU ENTER
06.2-Bin Tray 06.2-Bin Tray
Exit
Copy Exit Copy Exit : Lower : Lower
Fax Exit Fax Exit : Upper : Upper
2
Select the item you want to change the setting by using the cursor key and
then press .
ENTER
3
Select "Upper" or "Lower" as you want. Then press
If you want to change another setting, repeat steps 2 and 3.
If you do not want to change any more settings, proceed to step 4.
4
Select "Exit" then press
ENTER
Changing the default settings
to save the setting.
shows:
LCD
shows:
LCD
.
ENTER
to save the setting.
4.9