Table of Contents
Advertisement
Changing the default settings
Setting
ECM
Default setting: ON.
"Line noise," or static on the line during a call, can easily disrupt the flow of data
from one fax machine to another.
That's why your fax machine gives you the option of using Error Correction Mode
(
). When two fax machines communicate while running in
ECM
machine automatically checks the data as it sends. If the receiving fax machine can't
verify the transmission, the first machine will re-send it as necessary.
Note:
gives you a better chance of transmitting a fax document over a bad
ECM
phone line, but it could also slow down the transmission time. The worse a
line is, the slower the transmission. That's why the machine lets you turn
on or off as needed.
ECM
Note: Not all fax machines have
a fax machine not currently using
transmission.
ECM
1
Press
, 2, 2, 0, 9,
MENU
ENTER
09.ECM Mode
09.ECM Mode
ON
ON
OFF
OFF
2
Using the cursor key, select the mode you want.
Then press
to save the setting.
ENTER
Memory transmission
Default setting: ON.
Note: When the machine's memory is full, it can transmit only through the docu-
ment feeder (real time transmission).
To change the default setting of memory transmission:
1
Press
, 2, 2, 0, 6,
MENU
ENTER
06.Memory Transmission
06.Memory Transmission
ON
ON
OFF
OFF
2
Using the cursor key, select the mode you want.
4.2
, the sending
ECM
. If you've activated
and then transmit to
ECM
ECM
, the fax will automatically select non-
ECM
. The
shows the current
setting:
LCD
ECM
. The
shows:
LCD
Then press
to save the setting.
ENTER
If the
light glows, memory transmission is on.
MEMORY TRANSMIT
If the
light doesn't glow, memory transmission is off.
MEMORY TRANSMIT
Quick Memory transmission
Default setting: ON.
Important: Your fax machine's memory transmission feature must be turned on
to use Quick Memory transmission (see left column).
To change the default setting of Quick Memory transmission:
1
Press
, 2, 2, 0, 7,
. The
MENU
ENTER
07.Quick Memory Tx
07.Quick Memory Tx
ON
ON
OFF
OFF
2
Using the cursor key, select the mode you want.
Then press
to save the setting.
ENTER
TTI transmission
Default setting: ON.
Every fax page you send arrives at the receiving machine with a single line of text
at the very top of the page. This text lists a name, called the Transmit Terminal
Identifier (
), and a fax number. You can set the machine to not send the
TTI
1
Press
, 2, 2, 0, 8,
. The
MENU
ENTER
08.TTI Transmission
08.TTI Transmission
ON
ON
OFF
OFF
2
Using the cursor key, select the mode you want.
Then press
to save the setting.
ENTER
shows:
LCD
TTI
shows:
LCD
.
Advertisement
Table of Contents
