Distinctive Ring Detection (Drd) - imagistics 5000 Operating Manual

3
Press to save the setting.
ENTER
Now the cover page feature is working but your message line (shown in the example
as "We appreciate your business. Thank you!") is blank. To enter that message, see
"Entering the cover page message," below.
Entering the cover page message
1
Press , 3, 2, 0, 2, . The
MENU ENTER
02.Cover Page Message 02.Cover Page Message
Message Message Lower Case Lower Case
_
2
Use the numeric keypad to enter a message for the cover page. (Regarding
how to enter the character, see "Entering character" on page 1.12.) The mes-
sage can be up to 40 characters in length.
3
When the message appears as you want it, press
Printing the cover page
To confirm that the cover page is set correctly, print a sample cover page from your
fax machine. Press , 5, 1, 0, 9,
MENU
shows:
LCD
to save it.
ENTER
.
ENTER

Distinctive ring detection (DRD)

Many phone companies now offer their customers a special service which makes it
possible for one phone line to do the work of two.
With this service, you physically still have one phone line, but, electronically, you
have two phone numbers. Your phone recognizes these different numbers and rings
differently for each one.
For example, this makes it easy for you to have both a business number and a home
number on one phone line, so you can answer one with "Jane Doe Consulting," and
the other with "Hello." This works because you can tell the difference between the
distinctive patterns of the two rings.
Your fax machine is also smart enough to tell the difference between two different
numbers that are ringing it. All you have to do is set up your machine for the dis-
tinctive ring detection ( ) feature.
DRD
In order to use , your phone company must set up your distinctive ring service.
DRD
When it does, it will assign a ring pattern. For example, the standard telephone ring
is 2 seconds "on" (ringing) and 4 seconds "off" (silent), after which it repeats itself.
Your fax has eight possible distinctive ring patterns for use with
should work with your phone company's
Pattern One complete ring pattern (seconds)
A
0.8 on, 0.4 off, 0.8 on, 4.0 off
B
0.4 on, 0.2 off, 0.4 on, 0.2 off, 0.8 on, 4.0 off
C
0.3 on, 0.2 off, 1.0 on, 0.2 off, 0.3 on, 4.0 off
D
1.0 on, 0.5 off, 1.0 on, 3.5 off
E
0.5 on, 0.5 off, 0.5 on, 0.5 off, 1.0 on, 3.0 off
F
0.5 on, 0.5 off, 1.0 on, 0.5 off, 0.5 on, 3.0 off
G
0.4 on, 0.6 off, 0.4 on, 4.6 off
H
1.5 on, 0.5 off, 0.5 on, 3.5 off
For example: pattern is 0.3 seconds ringing, 0.2 seconds silent, 1 second ringing,
C
0.2 seconds silent, 0.3 seconds ringing and 4 seconds silent. Then it goes back to the
first 0.3-second ring and starts over.
Basic operation
. One of them
DRD
service. This chart lists the patterns:
DRD
3.31