imagistics 5000 Operating Manual page 70

7
Enter the fax number you want. Use either a one-touch number, a speed-dial
number, a call group or a regular number dialed from the numeric keypad.
8
Press to save the location. The machine will return to step 4.
ENTER
If you want to add more locations, repeat steps 4–8.
To return to the standby mode, press
Adding some pages to the stored command
1
Press . /
COMM CANCEL CONFIRM
2
Press or to scroll through currently stored commands.
Review Commands
Command No. : 01 30 / 19:00
9-234-5678
[ Result ] [ EditLoc. ] [ Erase ]
3
When the command you want to edit shown, press
appears.
Review Commands
Command No. : 01 30 / 19:00
9-234-5678
[ AddPages ]
4
Press [AddPages]. The shows:
LCD
Set Doc. and Press START
Command No. : 01 30 / 19:00
Normal Normal
[ Mode ] [ Contrast ]
5
Set the documents you want to add to the command, and then press
After finishing to scan, the machine will return to the standby mode.
.
STOP
..
or until [AddPages]
Re-sending incomplete jobs
When the transmission error occurs or all redial attempts failed, the command will
be stored in your machine's memory as an incomplete job, if the Job re-schedule set-
ting is On (see "Job re-schedule," page 3.25). You can re-send it, if you want.
To re-send incomplete jobs:
1
Press
COMM
2
Press or
Review Commands
Command No. : 07
9-876-5432
[ Result ] [ EditLoc. ] [ Restart ]
3
When the incomplete job you want shown, press [Restart]. The
Review Commands
OK to Restart?
4
To go ahead with restarting the transmission, press [Yes]. The machine will
start the transmission.
Printing a delayed command list
Your machine can print a command list which tells you:
• The command's identification number
• The phone number, or "remote location"
• The start time (this appears in a
.
START
• A "note" telling if the command is a polling or F-Code operation (see pages
3.15–3.16 for more on polling and 3.33–3.43 for more on F-Code communication).
To print a delayed command list, press
. / ..
CANCEL CONFIRM
to scroll through currently stored commands.
Incomplete
[ Yes ] [ No ]
, : format)
DD HH MM
, 5, 1, 0, 4
MENU
Basic operation
shows:
LCD
.
ENTER
3.23