If You Have Unsatisfactory Printout Quality - imagistics 5000 Operating Manual

Just in case ...
5
Open the inner cover fully.
Important: You must hold the cover open. It won't stay open by itself.
6
Use the cloth with the rollers cleaner to
clean the face of the rollers. Rotate the
rollers by hand to allow cleaning of the
entire roller surface.
7
Use the cloth with the alcohol to clean
the scanner glass.
Cleaning the LED print head
If you find your fax recipients complaining that the faxes you receive or copy image
quality are streaked, the LED print head may be dirty.
Important: Be careful not to put your hand between the top cover and the
machine.
1
Turn off your fax machine.
2
Get a soft, lint-free cloth and moisten it
with isopropyl alcohol.
3
Open the top cover and then open the
printer cover.
CAUTION:
The fuser unit becomes very hot.
Do not touch the fuser unit when you
are cleaning the LED print head.
4
Using the cloth, gently clean the LED print head.
Note: Do not use abrasive materials on the LED print head, and do not
subject the LED print head to heavy pressure.
5.12

If you have unsatisfactory printout quality

Your machine automatically cleans its charger and transport roller, two items which
are very important to printout quality. If you notice poor printout quality (whether
scanner
on received faxes or on copies), review "Print quality problems" (pages 5.3-5.4), and
glass
see whether any of the proposed solutions helps your machine. If none do, please call
the Imagistics International Inc. Diagnostic Center at: 1-800-243-5556