imagistics 5000 Operating Manual page 88

Using a relay box
Once your fax machine receives a document via
Code relay boxes, it sends it to the other fax machines that you've set up on your
relay box. (See "Creating or Modifying an F-Code box", pages 3.33–3.38.)
If you set the Auto print mode to on when you created the relay box, your machine
will print the received document, then relay it to the other machine. Otherwise,
your machine will only relay it to the other machines, not print it. See "If you chose
Relay," page 3.37 for more details on this setting.
Also, you can send (relay broadcast initiation) the document to another hub
machine's F-Code box and get that machine to relay it to others. See "F-Code trans-
mission" on page 3.42 for more detail.
The hub performs a relay broadcast, and the machine which sends the original doc-
ument to the hub has performed a relay broadcast initiation.
Erasing an empty F-Code box
An F-Code box must be empty in order to erase it. (If you select an F-Code box in
these steps which is not empty, the machine beeps. If this happens, print all docu-
ments in that box before erasing it.)
To erase an empty F-Code box:
1
Press , 3, 5, 0, 2, . The
MENU ENTER
02. Erase F-Code Box 02. Erase F-Code Box
Enter Box Number (01-50):_ Enter Box Number (01-50):_
01:Trumbull Office 01:Trumbull Office
2
Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box you want to erase.
Note: If the F-Code box is storing any documents, the
on the .
LCD
3
Press . If the F-Code box is empty, the
ENTER
01. Trumbull Office 01. Trumbull Office
Enter I.D. Code Enter I.D. Code
_
- sub-addressing to one of its F-
ITU T
shows:
LCD
symbol is appeared
shows:
LCD
Important: If you select an F-Code box which is not empty, the machine
beeps and, before returning to step 2, briefly displays:
Box In Use Box In Use
Enter Box Number (01-50):_ Enter Box Number (01-50):_
01:Plano Office 01:Plano Office
Print any documents received in the F-Code box, then repeat
this procedure from the beginning to erase the box.
Otherwise, select another F-Code box.
4
Use the numeric keypad to enter the four-digit
5
Press .
ENTER
If you've entered an incorrect .
I D
and returns to standby mode.
If you've entered the correct . . code, the display shows:
I D
01. Trumbull Office 01. Trumbull Office
Ok to Erase? Ok to Erase?
[ [ Yes Yes ] [ ] [ No No
Note: If you want to quit without erasing the F-Code box you've selected,
press [No]. The fax will return to step 2.
Note: If you want to quit without erasing any F-Code box, press
The machine returns to standby mode.
6
Press [Yes] to erase the F-Code box.
To erase another F-Code box, repeat steps 2-6.
To finish, press .
STOP
Basic operation
. . code.
I D
. code, your fax machine rejects the attempt
] ]
STOP
.
3.41