Programming Regular Polling - imagistics 5000 Operating Manual

9
Press .
ENTER
If you select ON, proceed to step 10.
If you select OFF, skip to step 13.
10
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
11
Using the cursor key, select the mode you want. Then press
If you want to make another setting, repeat step 11 and 12.
Note: Choose "-----" if you do not want to specify for this programmable one-
touch key.
12
Select "Exit" and press
ENTER
13
Press to return your machine to standby mode.
STOP

Programming regular polling

To program a regular polling operation into a programmable one-touch key:
1
Follow steps 1–6 on pages 3.44–3.45.
2
Select "Polling" and press
ENTER
Polling Polling
ON ON
OFF OFF
3
Select ON using the cursor key. Then press
4
If you want the polling to begin immediately every time you press the key,
proceed to step 5.
If you want to delay the polling, follow steps 7–9 on page 3.45.
5
If you want to make additional settings for this programmable one-touch
number, select it now. (Regarding the operation for programming it, see each
page.)
Otherwise, proceed to step 6.
6
Select "Exit" and press
ENTER
7
Press to return your machine to standby mode.
STOP
.
ENTER
.
ENTER
.
. The shows:
LCD
.
ENTER
.
Programming a Program key for F-Code transmission
For this operation to work, two things must be true:
• You must know how the remote fax is using each F-Code box to which you're
transmitting — for example, as a security box or a relay box. Different fax manu-
facturers may use slightly different terms, but the concepts are the same.
• You must know the remote fax's
which you want to transmit.
To program an F-Code transmission into a programmable one-touch key:
1
Follow steps 1–6 on pages 3.44–3.45.
2
Select "F-Code Transmit" and press
F-Code Transmit F-Code Transmit
Enter Sub-Address Enter Sub-Address
_
3
Use the numeric keypad to enter the
you want to send the document.
4
Press . The shows:
ENTER LCD
F-Code Transmit F-Code Transmit
Enter Password Enter Password
_
Note: If there isn't a password for this box, press
5
Use the numeric keypad to enter the appropriate
Then press .
ENTER
6
If you want the transmission to begin immediately every time you press the
key, proceed to step 7.
If you want to delay the transmission, follow steps 7–9 on page 3.45.
7
Select "Exit" and press
ENTER
The asks if you want to make option settings which includes; resolution,
LCD
contrast, memory transmission, report, cover page and Fax & Copy. If you
want to make any of these settings, select ON using the cursor key.
8
Press .
ENTER
If you select ON, proceed to step 9.
If you select OFF, skip to step 12.
9
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
- sub-address and password for each box to
ITU T
. The shows:
ENTER LCD
- sub-address for the box to which
ITU T
, then skip to step 6.
ENTER
- password for the box.
ITU T
.
.
ENTER
Basic operation
3.47