imagistics 5000 Operating Manual page 106

Turning department code protection on and off
Important: This feature will work only if you've activated the passcode protection
(see page 3.52).
1
Press , 3, 3, 0, 1, . The
MENU ENTER
01. Department Code Protect 01. Department Code Protect
Enter Passcode(0000-9999): Enter Passcode(0000-9999):
_
2
Use the numeric keypad to enter the four-digit passcode.
To change one digit, press to move left or
is under the digit, then use the numeric keypad to enter the correct number.
3
Press . The shows:
ENTER LCD
01.Department Code Protect 01.Department Code Protect
ON ON
OFF OFF
4
Using the cursor key, select the mode you want.
5
Press to save the setting.
ENTER
Sending a fax using a department code
For this operation to work, two things must be true:
• The four-digit department code must exist on your fax machine.
• You must know the department code.
1
Insert the document.
2
Adjust resolution and contrast if necessary.
3
Enter the fax number by either pressing a one-touch key, entering a speed-
dial number or dialing from the numeric keypad.
If you enter the fax number using a one-touch key, skip to step 5.
Otherwise, go on to step 4.
4
Press .
START
shows:
LCD
to move right until the cursor
5
The shows:
LCD
234-5678
Enter Department Code Enter Department Code
0000
6
Use the numeric keypad to enter the appropriate four-digit department code.
7
Press again.
START
Printing the department time list
To print the list, press , 5, 1, 1, 0,
MENU
Note: If department code operation is protected (see left column), the fax beeps
briefly and then returns to standby mode. You will have to turn off the pro-
tection first, then repeat the above.
The department time list includes the following information for each department
code:
• Time period covered by the department time list
• Each department code
• Total communication time (in hours, minutes and seconds;
the communication time up to 999:59:59 (999 hours:59 minutes:59 seconds). If the
fax exceeds the maximum time, it does not count further.
• Total printed pages — Counts the pages up to 65535 pages. If the fax exceeds the
maximum number of pages, it restarts from 0 (zero).
Note: If you want to clear the total counts of each department, see "Clearing the
department time list", below.
Clearing the department time list
To clear the current total counts of each department code:
Press , 3, 3, 0, 4, ,
MENU ENTER ENTER
The total communication time and total printed pages for each department code are
cleared. The department code will not be erased.
.
ENTER
: : ) — Counts
HH MM SS
.
Basic operation
3.59