Printing A List Of Speed-Dial Numbers; Fax Dialing Via Speed-Dial - imagistics 5000 Operating Manual

4
Press [Yes] to erase the number.
To erase another speed-dial number, repeat steps 2–4. Or press
standby mode.

Printing a list of speed-dial numbers

You can easily print a list of your speed-dial numbers. The list includes each number's
three-digit identifier, the Location
ID
stored for that speed-dial number.
To print a list of speed-dial numbers, press

Fax dialing via speed-dial

To send a fax using a speed-dial number:
1
Place the document in the
ADF
2
Adjust resolution and contrast if necessary.
3
Press / once. The
SPEED DIAL GROUP
Enter Speed-Dial No. Enter Speed-Dial No.
S_ S_
Fine Fine Normal Normal
[ Mode ] [ Contrast ] [ Mode ] [ Contrast ]
4
Use the numeric keypad to enter the three-digit identifier (such as 018, in this
example) for the speed-dial number you want to dial. The
Location (or fax number) you stored:
ID
Enter Speed-Dial No. Enter Speed-Dial No.
S018:Trumbull Office 18:Trumbull Office
Fine Fine Normal Normal
[ Mode ] [Contrast] [ Mode ] [Contrast]
5
Press .
START
to return to
STOP
(if any) and fax/telephone number you've
, 5, 1, 0, 6, .
MENU ENTER
.
shows:
LCD
shows the
LCD
What happens next depends on whether you specified memory transmission or real
time transmission:
If you specified quick memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialing, your machine scans the other documents into memory.
• The shows the Location and the document's width and resolution settings:
LCD ID
Note: If the entry doesn't have a Location
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick memory transmission, see page 2.2.)
If you specified normal memory transmission:
• Your fax machine scans your entire document into memory, then dials the other
fax machine.
• The shows the Location and the document's width and resolution settings:
LCD ID
Note: If the speed-dial entry doesn't have a Location
• When the other machine answers, your fax will transmit the document directly
from memory. (To review Memory transmission, see page 2.2.)
If you specified real time transmission:
• Your fax machine dials the other fax machine.
• The shows the Location and the document's width and resolution settings:
LCD ID
Note: If the speed-dial number doesn't have a Location
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes. (To review the Real time transmission, see page 2.3)
Voice Calling via speed-dial
To dial a phone call using a speed-dial number, you must have an optional handset
attached to your machine. To make the call:
1
Obtain a dial tone by doing one of the following:
• Lift the handset
• Press / to use the monitor speaker
MONITOR CALL
2
Press / once. The
SPEED DIAL GROUP
Enter Speed-Dial No. Enter Speed-Dial No.
S_ S_
Normal Normal Normal Normal
[ [ Tone Tone ] [ Mode ] [Contrast] ] [ Mode ] [Contrast]
Basic operation
, the number appears.
ID
, the number appears.
ID
, the number appears.
ID
shows:
LCD
3.5