imagistics 5000 Operating Manual page 30

4
The now shows the current calendar/clock setting, with a cursor appear-
LCD
ing on the first digit.
9. User Install 9. User Install
Enter Current Date and Time Enter Current Date and Time
01/01 2001 00:00 1/01 2001 00:00
5
Use the numeric keypad to enter the correct date and time, using a
format for the date and 24-hour format for the time. For instance, to set 2:30
on September 27, 2001, press 0 9 2 7 0 1 1 4 3 0, which results in:
PM
9. User Install 9. User Install
Enter Current Date and Time Enter Current Date and Time
09/27 2001 14:30 9/27 2001 14:30
Note: Your fax machine automatically inserts the spaces and date-slash. All
you have to do is enter the digits.
To change a digit, press to move the cursor left, or
Then enter the correct digit.
6
Press to save the clock setting and continue.
ENTER
7
The now asks if you want to set the calendar/clock to automatically
LCD
recognize daylight saving time (
9. User Install 9. User Install
Daylight Saving Daylight Saving
ON ON
OFF OFF
When the setting is ON, your machine automatically recognizes
the appropriate switchover Sundays each year.
When the setting is OFF, no automatic change will occur.
8
Using the cursor key, select the mode you want.
9
Press to save the setting and continue.
ENTER
10
The now shows the machine's current reception mode.
LCD
9. User Install 9. User Install
Select Rx Mode Select Rx Mode
Fax Ready Fax Ready
Tel/Fax Ready Tel/Fax Ready
MMDDYY
to move it right.
).
DST
DST
11
For now, select Fax Ready. (This setting can always be changed. We'll discuss
reception modes further on pages 2.7–2.8.)
12
Press
ENTER
13
The now asks you to enter the type of dialing needed for the fax machine,
LCD
either tone or pulse:
9.User Install 9.User Install
Select Dialing Type Select Dialing Type
Tone
Pulse Pulse
14
Using the cursor key, select the mode you want.
15
Press
ENTER
16
The now asks you to enter your fax number as you want it to appear on
LCD
other fax machines' displays or printouts. The fax industry term for this
number is Subscriber
9.User Install 9.User Install
Enter Your Fax Number Enter Your Fax Number
_
17
Use the numeric keypad to enter the fax number. The number may contain up
to 20 characters (numbers and dashes).
Note: To insert a dash, as shown here, press [ – ]. To insert " + " before the
country number for the overseas call, press [ + ].
Note: If you make a mistake, press
To change just one number, press
at 2 on
AM
Press
rectly.
18
Press
ENTER
19
The now asks you to enter the name you want to appear at the top of
LCD
faxes you send. You can enter three TTI's.
Select TTI 1, 2 or 3 using the cursor key.
9. User Install 9. User Install
Exit
TTI 1 TTI 1
TTI 2 TTI 2
to save the setting and continue.
to save the setting and continue.
.
ID
[ ][ - ]
to erase to the left.
CANCEL
to move left, or
to erase the number. Then re-enter the fax number cor-
CANCEL
to save the number and continue.
:Not Stored :Not Stored
:Not Stored :Not Stored
Getting started
to move right.
1.19