imagistics 5000 Operating Manual page 84

34
Select "Erase Tx Doc" and press
01.Bulletin Box 01.Bulletin Box
Erase Tx Doc. Erase Tx Doc.
ON ON
OFF OFF
Erasure of transmitted documents tells your machine if it should erase a docu-
ment from the box after a caller retrieves (polls) the document.
ON: Your machine erases the document from the box as soon as it sends it. If
you choose "On", this box can be polled only once per document.
OFF: Your machine does not erase a document from the box when it's polled.
As long as your machine holds
ment from the box, the document is available indefinitely for polling.
35
Using the cursor key, select the mode you want.
Press and skip to step 46.
ENTER
If you chose Relay:
36
The shows:
LCD
01:Relay Box
Exit
Box Name :Not Stored
Sub-Address :Not Stored
37
Enter the box name, the sub-address and the password for the F-Code box as
described in steps 8-17.
38
Press . The shows:
ENTER LCD
01:Relay Box 01:Relay Box
Password : 123456 Password : 123456
Location Location : Not Stored : Not Stored
TTI Type TTI Type : Sender : Sender
39
Select "Location" and press
01:Relay Box 01:Relay Box
Enter Fax Number Enter Fax Number
_
Enter the fax number using a one-touch key, a speed-dial number or a call
group number. You cannot use the numeric keypad to enter these numbers.
You can specify up to 300 numbers for a remote unit.
. The shows:
ENTER LCD
power and you do not erase the docu-
AC
. The shows:
ENTER LCD
Note: If you want to review the numbers you entered, press [Review].
G01 G01
02:NY Office 02:NY Office
01:Plano Office 01:Plano Office
[ Return ] [ Return ] [ Erase ] [ Erase ]
If you want to erase any number, move the cursor on it and press
[Erase].
When you finish to review, press [Return] to return to the previous
display.
40
Press . The shows:
ENTER LCD
01:Relay Box 01:Relay Box
Password Password :123456 :123456
Location Location : 01, 03,S001 : 01, 03,S001
TTI Type :Sender TTI Type :Sender
41
Select "TTI Type" and press
01:Relay Box 01:Relay Box
TTI Type TTI Type
Sender Sender Yours Yours
Both Both
The machine asks for the type of
relayed to other callers.
• Sender — Relay the document with sender unit's
• Both — Relay the document with both the sender unit's
• Yours — Relay the document with your
42
Using the cursor key, select the mode you want.
43
Press . The shows:
ENTER LCD
01:Relay Box 01:Relay Box
Auto Print :OFF Auto Print :OFF
. The shows:
ENTER LCD
you want to appear on the faxes that are
TTI
(don't send your
TTI
and your
TTI
instead of the sender unit's.
TTI
Basic operation
).
TTI
.
TTI
3.37