Programming A Batch Transmission; Programming Printouts - imagistics 5000 Operating Manual

Programming a batch transmission

Note: For this operation to work, one thing must be true:
• The batch box you're using must exist on your fax machine.
To program a batch transmission into a programmable one-touch key:
1
Follow steps 1–6 on pages 3.44–3.45.
2
Select "Batch Transmit" and press
Batch Transmit Batch Transmit
1:New York Office 09/21:00 1:New York Office 09/21:00
2:Chicago Office 00/22:00 2:Chicago Office 00/22:00
3:L.A. Office 3:L.A. Office 00/21:30 00/21:30
3
Using the cursor key select the batch box you want to assign to this one-touch
key. Then press .
ENTER
4
Select "Exit" and press
ENTER
The asks if you want to make option settings which includes; resolution,
LCD
contrast and Fax & Copy. If you want to make any of these settings, select ON
using the cursor key.
5
Press .
ENTER
If you select ON, proceed to step 6.
If you select OFF, skip to step 8.
6
Using the cursor key, select the setting you want to specify for this program-
mable one-touch number. Then press
7
Using the cursor key, select the mode you want. Then press
If you want to make another setting, repeat step 6 and 7.
Note: Choose "-----" if you do not want to specify for this programmable one-
touch key.
8
Select "Exit" and press
ENTER
9
Press to return your machine to standby mode.
STOP
. The shows:
ENTER LCD
.
.
ENTER
.
ENTER
.

Programming printouts

To program a programmable one-touch key to print a list:
1
Press , 3, 4, 0, 1, . The
MENU ENTER
one-touch number available:
01.Set P One-Touch
Select P One-Touch (57-60)
57:Not Stored
2
Select the programmable one-touch key in which you want to program or
change.
Note: You can select the programmable one-touch key by pressing that key
on the control panel.
Note: If you're changing a previously stored command: If your previous com-
mand for this key was for a printout operation, and you want to keep
this key programmed for a printout operation, use these instructions
to make changes. But if you want to assign this key to a completely
different operation, for example, a batch transmission, then you must
first erase the stored command before programming the new one.
3
Press . The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
01.Set P One-Touch
Communication
List Print
Store Document
4
Using the cursor key, select "List Print" and press
01.Set P One-touch 01.Set P One-touch
Function List
User Settings User Settings
Journal
5
Using the cursor key, select the list you want. Then press
6
Press to return your machine to standby mode.
STOP
Basic operation
shows the first empty programmable
LCD
. The shows:
ENTER LCD
.
ENTER
3.49