imagistics 5000 Operating Manual page 100

Hide thumbs Also See for 5000:
Table of Contents

Advertisement

4
Using the cursor key, select the mode you want. Then press
shows the machine's current clock setting:
11.Security Rx
11.Security Rx
Enter Start Time
Enter Start Time
13:30
3:30
5
If you want security reception to begin now (and at this same time every day),
skip to step 7.
Otherwise, go on to step 6.
6
Use the numeric keypad to enter the time (use a 24-hour format) when secu-
rity reception should begin every day. "Type over" the numbers displayed.
To change a digit, press
to move to the left, or
the correct digit.
7
Press
to save the setting.
ENTER
Note: After activating security reception, you can assign security reception to a
Soft key (see page 3.17) to turn it on and off. Turning on security reception
by pressing a Soft key begins security reception immediately, not at the time
setting you entered at step 6.
To turn security reception on by pressing a soft key:
1
Program a Soft key for security reception. (See page 3.17.)
2
Press the Soft key that is assigned to security reception.
Security Rx
Security Rx
Enter Passcode (0000-9999)
Enter Passcode (0000-9999)
_
3
Enter the protection passcode and then press
Note: To turn security reception off, see "Printing from security reception/Turning
off security reception," next column.
. The
ENTER
LCD
to move right. Then enter
.
ENTER
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine's
memory and the
light comes on. But the incoming fax message is
MEMORY RECEIVE
not printed.
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1
Press
, 4, 3, 0, 4,
.
MENU
ENTER
If you using the Soft key, press the Soft key instead of this operation.
In which way, the
shows:
LCD
Security Rx Document
Security Rx Document
Enter Passcode(0000-9999)
Enter Passcode(0000-9999)
_
Security Rx will be OFF
Security Rx will be OFF
2
Use the numeric keypad to enter the passcode.
3
Press
.
ENTER
• If you've entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security
reception off until the next time you've scheduled security reception or the
Soft key which programmed security reception is pressed.
If you using the Soft key, the
• If you've entered an incorrect passcode, your fax machine will refuse to
print, and security reception remains on.
Basic operation
light of the Soft key will be off.
LED
3.53

Advertisement

Table of Contents
loading

Related Products for imagistics 5000

Table of Contents