Table of Contents
Advertisement
Basic operation
3
If necessary, select desired resolution, contrast, reduction ratio.
4
Press
to begin the copying process.
START
Memory overflow message
If you've stored too much information in your machine's memory, a "Memory
Overflow" message may appear on the
If the memory overflow occurred at the first page:
Press STOP to Exit
Press STOP to Exit
Ratio 100%
Ratio 100%
Memory Overflow
Memory Overflow
[ Mode ] [ Contrast ]
[ Mode ] [ Contrast ]
Press
to discharge the documents from the
STOP
If the memory overflow occurred at the second page or later:
Memory Overflow
# of Stored Pages: 28
Keep These Pages?
[ Yes
] [
If this message appears, press [Yes] to tell your machine to print out the document
stored in memory, or press [No] to erase all pages stored during the current opera-
tion (but not previous operations).
Note: If you don't make a selection within 60 seconds, the machine will automati-
cally print out the document stored in the memory during the current
operation.
If supplies run out while copying
When your machine runs out of paper, toner, or drum is at end of life, it beeps, the
light glows and the
ALARM
LCD
in the 1st cassette, 2nd cassette (optional) or the bypass tray.
In this example, the machine runs out of the paper in the 1st cassette:
Ready to Fax
Ready to Fax
Sep 27 2001 11:30am Mem:100%
Sep 27 2001 11:30am Mem:100%
Supply Paper (1st : Letter
Supply Paper (1st : Letter
[ Mode ] [Contrast]
[ Mode ] [Contrast]
2.10
.
LCD
Mem: 2%
Mem: 2%
.
ADF
No
]
shows which source has run out of supplies or paper
)
)
If you want to cancel the current copying job, press
displayed paper source to resume copying.
. Otherwise, install paper to
STOP
Advertisement
Table of Contents
