Review Commands - imagistics 5000 Operating Manual

3
Press the Macro key ( 1, 2 or
M M
shows:
LCD
Macros Macros
Ok to Erase? Ok to Erase?
M01: Trumbull M01: Trumbull
[ [ Yes Yes ] [ ] [ No No
Important: If you want to quit without erasing the Macro key you've
selected, press [No]. The machine will return to step 2.
4
Press [Yes] to erase the job.
To erase another Macro key, repeat steps 2–4. Or press
mode.
Printing a list of your Macro keys
Your fax machine can print a list of the Macro keys.
The list includes:
(1) each key's Macro key number
(2) the name of the job stored in the Macro key
To print a list of Macro keys, press
MENU
Setting the speed for Macros
You can adjust the speed of one step in the Macro key.
1
Press . The
MACRO PROGRAM LCD
Macros Macros
Enter Macros Enter Macros Change Title Change Title
Erase Macros Erase Macros
Macro Speed Macro Speed
2
Select "Macro Speed" and press
Macros Macros
Faster Slow Slow
Fast
Normal Normal
3
Select the mode you want.
4
Press to save the setting.
ENTER
3) you want to erase. Then press
M ENTER
] ]
to return to standby
STOP
, 5, 1, 1, 6, .
ENTER
shows:
. The shows:
ENTER LCD

Review commands

. The
Your machine can store many commands in its memory.
You can cancel, confirm or edit the command in your machine's memory by pressing
. /
COMM CANCEL CONFIRM
Reviewing or canceling commands
Delayed commands, redial attempts, current fax transmissions and incomplete jobs
are all stored in your fax machine's memory and given a command number, like
"C01."
Your machine can store up to 99 delayed commands. It identifies each by a two-digit
command number from 01 to 99.
To see your machine's stored commands or to cancel them:
1
Press .
COMM CANCEL
• The shows the first command, indicated by its command number and
LCD
the phone number it will dial.
• If a command is in progress, that will be the first command the
• If there are no stored commands in your machine — It beeps briefly and
displays "No Command" on the
Note: You can see 70 most recent fax transactions and results of each trans-
action by pressing [Result].
Here, you see Command No. : 01, and the number it's set to dial. If the com-
mand is to send a broadcast, "Broadcast" appears instead of the phone
number. (For more information of "Broadcasting," see page 3.9.)
If the command is to send a batch transmission, the
number (such as "B01") rather than the command number. (For more informa-
tion of "Batch transmission," see pages 3.12–3.14.)
If the command is for a Call group dialing, the group number (such as "G01")
appears instead of the phone number. (For more information of "Call group
dialing," see pages 3.6–3.7.)
Note: The command for Remote copy cannot be canceled.
2
Press or to scroll through currently stored commands.
. You can also see the result of fax transactions on the
/ ..
CONFIRM
.
LCD
LCD
Basic operation
.
LCD
shows:
LCD
shows its batch box
3.21