Index to the CLI Commands
This appendix lists the CLI commands discussed in this configuration guide. Look for the CLI
command alphabetically by feature. You can also use your browser's search function to find the
command you want. When you find the command, click on the link to display the section that
discusses that command.
ACLs (IP)
Numbered ACL
Commands
access-list <num> deny | permit <ip-protocol>
<source-ip> | <hostname> <wildcard> [<operator>
<source-tcp/udp-port>] <destination-ip> | <hostname>
<wildcard> [<operator> <destination-tcp/udp-port>]
[match-all <tcp-flags>] [match-any <tcp-flags>]
[<icmp-type>] [established] [precedence <name> |
<num>]
[tos <number>] [dscp-matching <number>]
[802.1p-priority-matching <number>] [dscp-marking
<number> 802.1p-priority-marking <number>
internal-priority-marking <number>] | [dscp-marking
<number> dscp-cos-mapping] | [dscp-cos-mapping]
[fragment] [non-fragment] [first-fragment] [fragment-offset
<number>] [spi <00000000 - ffffffff>] [log]
access-list <num> deny | permit host <ip-protocol> any
any [log]
access-list <num> deny | permit icmp any any [log]
<icmp-type> | <type-number> <code-number>
access-list <num> deny | permit any I <source-ip>
|<source-ip>/<mask-bits> | <hostname> <wildcard>
[log]
access-list <acl-num> remark [<comment-text>]
no access-list <acl-number>
<entire-deny-or-permit-statement>
show access-list <acl-num> | all
BigIron RX Series Configuration Guide
53-1002253-01
See ...
"Configuring extended numbered ACLs"
"Enabling ACL filtering of fragmented or
non-fragmented packets"
on page 568
"ICMP filtering for extended ACLs"
"Configuring standard numbered ACLs"
"Numbered ACLs: adding a comment"
"Numbered ACLs: deleting a comment"
"Deleting ACL entries"
on page 560
"Displaying ACL definitions"
on page 544
Appendix
E
on page 531
on page 569
on page 529
on page 558
on page 559
1329