Command Syntax
FTOS(conf)#clock summer-time pacific date Mar 14 2012 00:00 Nov 7 2012 00:00
FTOS(conf)#
Set Recurring Daylight Saving Time
Set a date (and time zone) on which to convert the switch to daylight savings time on a specific day every
year.
If you have already set daylight savings for a one-time setting, you can set that date and time as the
recurring setting using the
To set a recurring daylight saving time, use the following command:
Command Syntax
clock summer-time time-zone
recurring start-week start-day
start-month start-time end-week
end-day end-month end-time [offset]
606
|
System Time and Date
Command Mode
clock summer-time time-zone recurring
Command Mode
CONFIGURATION
Purpose
command.
Purpose
Set the clock to the appropriate timezone and adjust to
daylight savings time every year.
•
Enter the three-letter name for the time
time-zone:
zone. This name is displayed in the show clock
output.
•
(OPTIONAL) Enter one of the following
start-week:
as the week that daylight savings begins and then
enter values for
start-day
•
week-number:
Enter a number from 1-4 as the
number of the week in the month to start daylight
savings time.
•
first:
Enter this keyword to start daylight savings time
in the first week of the month.
•
Enter this keyword to start daylight savings time
last:
in the last week of the month.
•
Enter the name of one of the 12 months
start-month:
in English. You can enter the name of a day to change
the order of the display to
•
Enter the number of the day. Range: 1 to
start-day:
31. You can enter the name of the month to change
the order of the display to
•
Enter a four-digit number as the year.
start-year:
Range: 1993 to 2035
•
Enter the time in hours:minutes. For the
start-time:
hour variable, use the 24-hour format, example, 17:15
is 5:15 pm.
through
end-time:
time day month year.
time day month year.