File System Management - Dell Force10 MXL Blade Configuration Manual

Figure 3-8. Tracking Changes with Configuration Comments
FTOS#show running-config
Current Configuration ...
Current Configuration ...
! Version E8-3-16-0
! Last configuration change at Tue Mar
! Startup-config last updated at Tue Mar
!
boot system stack-unit 5 primary tftp://10.11.200.241/dt-m1000e-3-a2
boot system stack-unit 5 secondary system: B:
boot system stack-unit 5 default tftp://10.11.200.241/dt-m1000e-3-b2
boot system gateway 10.11.209.254
--More--

File System Management

The Dell Force10 system can use the internal Flash, USB Flash, or remote devices to store files. The
system stores files on the internal Flash by default, but you can configure it to store files elsewhere.
To view file system information:
Task
View information about each file system.
The output of the
file structure, media type, and read/write privileges for each storage device in use.
Figure 3-9. show file-systems Command Example
FTOS#show file-systems
Size(b) Free(b)
2143281152
15848660992
-
-
-
You can change the default file system so that file management commands apply to a particular device or
memory.
To change the default storage location:
Task
Change the default directory.
Command Syntax
show file-systems
command
show file-systems
Feature
2000785408 FAT32 USERFLASH
831594496 FAT32
-
-
-
Command Syntax
cd directory
6 11:51:50 2012 by default
6 07:41:23 2012 by default
(Figure 3-9) shows the total capacity, amount of free memory,
Type Flags Prefixes
rw flash:
USBFLASH rw usbflash:
- network rw ftp:
- network rw tftp:
- network rw scp:
Command Mode
EXEC Privilege
Command Mode
EXEC Privilege
Getting Started | 49