Stack Unit In Card-Problem State Due To Configuration Mismatch - Dell Force10 MXL Blade Configuration Manual

Figure 31-20. Card Problem Error - Different FTOS Versions: Resolved
FTOS#show system brief
Stack MAC : 00:1e:c9:f1:01:57
Reload Type : normal-reload [Next boot : normal-reload]
-- Stack Info
Unit UnitType
---------------------------------------------------------------------------------------------
----------------------------
0 Management
1 Member
2 Standby
3 Member
4 Member
5 Member

Stack Unit in Card-Problem State Due to Configuration Mismatch

Problem: A stack unit enters a Card-Problem state because there is a configuration mismatch between the
logical provisioning stored for the stack-unit number on the master switch and the newly added unit with
the same number.
Resolution: The resolution is to reload the stack. When the stack is up, the card problem will be solved
Step Task
1 From the Master Switch, reload the entire stack
570
| Stacking
--
Status ReqTyp
online
online MXL-10/40GbE
online MXL-10/40GbE
not present
not present
not present
CurTyp
MXL-10/40GbE MXL-10/40GbE
MXL-10/40GbE
MXL-10/40GbE
Command Syntax
reload
Version Ports
8-3-16-79 56
8-3-16-79 56
8-3-16-79 56
Command Mode
EXEC Privilege