Sample Configuration: Uplink Failure Detection
Figure 35-7
shows a sample configuration of Uplink Failure Detection on a switch/router in which you:
•
Configure uplink-state group 3.
•
Add downstream links TenGigabitethernet 0/1, 0/2, 0/5, 0/9, 0/11, and 0/12.
•
Configure two downstream links to be disabled if an upstream link fails.
•
Add upstream links TenGigabitethernet 0/3 and 0/4.
•
Add a text description for the group.
•
Verify the configuration with various
show
commands.
Uplink Failure Detection (UFD) | 619