Figure 11-2. GVRP Configuration Overview
Edge Switches
VLANs 70-80
VLANs 10-20
VLANs 30-50
Basic GVRP configuration is a two-step process:
1.
Enabling GVRP Globally
2.
Enabling GVRP on a Layer 2
Related Configuration Tasks
•
Configuring GVRP Registration
•
Configuring a GARP Timer
GVRP is configured globally
and on all VLAN trunk ports
for the edge and core switches.
Core Switches
NOTES:
VLAN 1 mode is always fixed and cannot be configured
All VLAN trunk ports must be configured for GVRP
All VLAN trunk ports must be configured as 802.1Q
Interface.
Edge Switches
VLANs 10-20
VLANs 30-50
VLANs 70-80
GARP VLAN Registration Protocol (GVRP) | 207