Dell Force10 MXL Blade Configuration Manual page 619

Figure 35-3.
show uplink-state-group
FTOS# show uplink-state-group
Uplink State Group: 1
Uplink State Group: 3
Uplink State Group: 5
Uplink State Group: 6
Uplink State Group: 7
Uplink State Group: 16
FTOS# show uplink-state-group 16
Uplink State Group: 16
FTOS#show uplink-state-group detail
(Up): Interface up
Uplink State Group
Upstream Interfaces
Downstream Interfaces :
Uplink State Group
Upstream Interfaces
Downstream Interfaces : Te 13/0(Up) Te 13/1(Up) Te 13/3(Up) Te 13/5(Up) Te 13/6(Up)
Uplink State Group
Upstream Interfaces
Downstream Interfaces : Te 13/2(Dis) Te 13/4(Dis) Te 13/11(Dis) Te 13/12(Dis) Te 13/13(Dis)
Uplink State Group
Upstream Interfaces
Downstream Interfaces :
Uplink State Group
Upstream Interfaces
Downstream Interfaces :
Uplink State Group
Upstream Interfaces
Downstream Interfaces : Tengig 0/40(Dwn)
Command Output
Status: Enabled, Up
Status: Enabled, Up
Status: Enabled, Down
Status: Enabled, Up
Status: Enabled, Up
Status: Disabled, Up
Status: Disabled, Up
(Dwn): Interface down
: 1 Status: Enabled, Up
:
: 3 Status: Enabled, Up
: Tengig 0/46(Up) Tengig 0/47(Up)
: 5 Status: Enabled, Down
: Tengig 0/0(Dwn) Tengig 0/3(Dwn) Tengig 0/5(Dwn)
Te 13/14(Dis) Te 13/15(Dis)
: 6 Status: Enabled, Up
:
: 7 Status: Enabled, Up
:
: 16 Status: Disabled, Up
: Tengig 0/41(Dwn) Po 8(Dwn)
(Dis): Interface disabled
Uplink Failure Detection (UFD) | 617