Standards Compliance; Ieee Compliance - Dell Force10 MXL Blade Configuration Manual

Standards Compliance

This chapter contains the following sections:
•

IEEE Compliance

• RFC and I-D Compliance
• MIB Location
Note: Unless noted, when a standard cited here is listed as supported by Dell Force10 operating software
(FTOS), FTOS also supports predecessor standards. One way to search for predecessor standards is to
use the http://tools.ietf.org/
number, and inspect the top of the resulting document for obsolescence citations to related RFCs.
IEEE Compliance
• 802.1AB — LLDP
• 802.1D — Bridging, STP
• 802.1p — L2 Prioritization
• 802.1Q — VLAN Tagging, Double VLAN Tagging, GVRP
• 802.1s — MSTP
• 802.1w — RSTP
• 802.3ac — Frame Extensions for VLAN Tagging
• 802.3ad — Link Aggregation with LACP
• 802.3ae — 10 Gigabit Ethernet (10GBASE-W, 10GBASE-X)
• 802.3ak — 10 Gigabit Ethernet (10GBASE-CX4)
• 802.3i — Ethernet (10BASE-T)
• 802.3x — Flow Control
• 802.1Qaz — Enhanced Transmission Selection
• 802.1Qbb — Priority-based Flow Control
• ANSI/TIA-1057— LLDP-MED
• Dell Force10 — FRRP (Force10 Redundant Ring Protocol)
• Dell Force10 — PVST+
• SFF-8431 — SFP+ Direct Attach Cable (10GSFP+Cu)
• MTU — 12,000 bytes
website. Click on "Browse and search IETF documents", enter an RFC
40
Standards Compliance | 671