Dell Force10 MXL Blade Configuration Manual page 529

Table 30-3. MIB Objects for Copying Configuration Files Using SNMP
MIB Object
copyUserName
copyUserPassword
To copy a configuration file:
Step Task
1 Create an SNMP community string with read/
write privileges.
2 Copy the f10-copy-config.mib MIB from the Dell Force10 iSupport webpage to the server to which you are
copying the configuration file.
3 On the server, use the command
snmpset -v snmp-version -c community-name -m mib_path/f10-copy-config.mib force10system-ip-address
mib-object.index
• Every specified object must have an object value, which must be preceded by the keyword
for valid values.
• must be unique to all previously executed
index
previously, a message like the one in
command again.
• Use as many MIB Objects in the command as required by the MIB Object descriptions in
complete the command. See
Note: You can use the entire OID rather than the object name. Use the form:
shown in Figure
Message 2 snmpset Index Value Error
Error in packet.
Reason: notWritable (that object does not support modification)
Failed object: FORCE10-COPY-CONFIG-MIB::copySrcFileType.101
Table 30-4 shows examples of using the command
assume that:
• the server OS is Unix
• you are using SNMP version 2c
• the community name is public, and
• the file f10-copy-config.mib is in the current directory or in the snmpset tool path.
OID
.1.3.6.1.4.1.6027.3.5.1.1.1.1.9
.1.3.6.1.4.1.6027.3.5.1.1.1.1.10
snmpset
i a s
{ | | } object-value...
Message 2
Table 30-4
30-8.
Object Values
Username for the
server.
Password for the
server.
Command Syntax
snmp-server community
community-name rw
as shown:
snmpset
commands. If an index value has been used
appears. In this case, increment the index value and enter the
for examples.
to copy a configuration. These examples
snmpset
Simple Network Management Protocol (SNMP) | 527
Description
Username for the FTP, TFTP, or SCP
server.
• If the copyUserName is specified so
must copyUserPassword.
Password for the FTP, TFTP, or SCP
server.
Command Mode
CONFIGURATION
. See
i
Table 30-3
OID.index i object-value
Table 30-3
to
as