Advertising TLVs
You can configure the system to advertise TLVs out of all interfaces or out of specific interfaces.
•
If you configure the system globally, all interfaces send LLDPDUs with the specified TLVs.
•
If you configure an interface, only the interface sends LLDPDUs with the specified TLVs.
If you configure LLDP both globally and at interface level, the interface-level configuration overrides the
global configuration. To advertise TLVs, follow these steps:
Step
Task
1
Enter LLDP mode.
2
Advertise one or more TLVs. Include the keyword
for each TLV you want to advertise.
•
For management TLVs:
system-description
•
For 802.1 TLVs:
port-vlan-id, vlan-name
•
For 802.3 TLVs:
•
For TIA-1057 TLVs:
•
•
•
•
•
•
•
•
•
•
system-capabilities
port-protocol-vlan-id
max-frame-size
guest-voice
guest-voice-signaling
location-identification
power-via-mdi
softphone-voice
streaming-video
video-conferencing
video-signaling
voice
voice-signaling
Command
protocol lldp
advertise {management-tlv |
dot1-tlv | dot3-tlv | med |
dcbx-appln-tlv | dcbx-tlv |
,
interface-port-desc}
,
Command Mode
CONFIGURATION
or INTERFACE
PROTOCOL LLDP
Link Layer Discovery Protocol (LLDP) | 323