Dell Force10 MXL Blade Configuration Manual page 451

Figure 25-15. show ip protocols Command Example to Show RIP Configuration Activity on Core 3
Core3#show ip protocols
Routing Protocol is "RIP"
Sending updates every 30 seconds, next due in 6
Invalid after 180 seconds, hold down 180, flushed after 240
Output delay 8 milliseconds between packets
Automatic network summarization is in effect
Outgoing filter for all interfaces is
Incoming filter for all interfaces is
Default redistribution metric is
Default version control: receive version 2, send version 2
Interface
TenGigabitEthernet 3/21
TenGigabitEthernet 3/11
TenGigabitEthernet 3/44
TenGigabitEthernet 3/43
Routing for Networks:
10.11.20.0
10.11.30.0
192.168.2.0
192.168.1.0
Routing Information Sources:
Gateway
10.11.20.2
Distance: (default is 120)
Core3#
1
Recv Send
2 2
2 2
2 2
2 2
Distance Last Update
120 00:00:22
Routing Information Protocol (RIP) | 449