Configure A Unix Logging Facility Level - Dell Force10 MXL Blade Configuration Manual

Configure a UNIX Logging Facility Level

You can save system log messages with a UNIX system logging facility.
To configure a UNIX logging facility level, use the following command in CONFIGURATION mode:
Command Syntax
logging facility [facility-type]
To view non-default settings, use the
Figure 4-3. show running-config logging Command Example
FTOS#show running-config logging
!
logging buffered 524288 debugging
service timestamps log datetime msec
service timestamps debug datetime msec
!
logging trap debugging
logging facility user
logging source-interface Loopback 0
logging 10.10.10.4
FTOS#
Command Mode Purpose
CONFIGURATION Specify one of the following parameters.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
The default is local7.
show running-config logging
auth (for authorization messages)
cron (for system scheduler messages)
daemon (for system daemons)
kern (for kernel messages)
local0 (for local use)
local1 (for local use)
local2 (for local use)
local3 (for local use)
local4 (for local use)
local5 (for local use)
local6 (for local use)
local7 (for local use). This is the default.
lpr (for line printer system messages)
mail (for mail system messages)
news (for USENET news messages)
sys9 (system use)
sys10 (system use)
sys11 (system use)
sys12 (system use)
sys13 (system use)
sys14 (system use)
syslog (for syslog messages)
user (for user programs)
uucp (UNIX to UNIX copy protocol)
command (Figure 4-3) in EXEC mode.
Management | 59