Command Syntax - Dell Force10 MXL Blade Configuration Manual

Figure 5-16
were assigned sequence numbers based on the order in which they were configured (for example, the first
filter was given the lowest sequence number). The
the two filters with the sequence numbers 5 and 10.
Figure 5-16. Prefix List
FTOS(conf-nprefixl)#permit 123.23.0.0 /16
FTOS(conf-nprefixl)#deny 133.24.56.0 /8
FTOS(conf-nprefixl)#show conf
!
ip prefix-list awe
seq 5 permit 123.23.0.0/16
seq 10 deny 133.0.0.0/8
FTOS(conf-nprefixl)#
To delete a filter, enter the
the filter you want to delete; then use the
To view all configured prefix lists, use either of the following commands in EXEC mode
(Figure 5-18):

Command Syntax

show ip prefix-list detail [prefix-name]
show ip prefix-list summary [prefix-name]
Figure 5-17. Command example:
FTOS>show ip prefix detail
Prefix-list with the last deletion/insertion: filter_ospf
ip prefix-list filter_in:
count: 3, range entries: 3, sequences: 5 - 10
seq 5 deny 1.102.0.0/16 le 32 (hit count: 0)
seq 6 deny 2.1.0.0/16 ge 23 (hit count: 0)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 0)
ip prefix-list filter_ospf:
count: 4, range entries: 1, sequences: 5 - 10
seq 5 deny 100.100.1.0/24 (hit count: 0)
seq 6 deny 200.200.1.0/24 (hit count: 0)
seq 7 deny 200.200.2.0/24 (hit count: 0)
seq 10 permit 0.0.0.0/0 le 32 (hit count: 0)
FTOS>
Figure 5-18. Command Example: show ip prefix-list summary
FTOS>show ip prefix summary
Prefix-list with the last deletion/insertion: filter_ospf
ip prefix-list filter_in:
count: 3, range entries: 3, sequences: 5 - 10
ip prefix-list filter_ospf:
count: 4, range entries: 1, sequences: 5 - 10
FTOS>
88
| Access Control Lists (ACLs)
shows a prefix list in which the sequence numbers were assigned by the software. The filters
show config
Command Mode
EXEC Privilege
EXEC Privilege
show config
command in PREFIX LIST mode and locate the sequence number of
no seq sequence-number
Purpose
Show detailed information about configured Prefix
lists.
Show a table of summarized information about
configured Prefix lists.
show ip prefix-list detail
command in PREFIX LIST mode displays
command in PREFIX LIST mode.
(Figure 5-17) and