Dell Force10 MXL Blade Configuration Manual page 609

Command Syntax
FTOS(conf)#clock summer-time pacific recurring Mar 14 2012 00:00 Nov 7 2012 00:00
FTOS(conf)#
Note: If you enter <CR> after entering the recurring command parameter, and you have already set a one-time
daylight saving time/date, the system uses that time and date as the recurring setting.
FTOS(conf)#clock summer-time pacific recurring ?
<1-4>
first
last
<cr>
FTOS(conf)#clock summer-time pacific recurring
FTOS(conf)#
Command Mode
Week number to start
Week number to start
Week number to start
Purpose
• If you entered a start-week, enter one of
end-week:
the following as the week that daylight savings ends:
• enter a number from 1 to 4 as the
week-number:
number of the week to end daylight savings time.
• enter the keyword first to end daylight savings
first:
time in the first week of the month.
• enter the keyword last to end daylight savings
last:
time in the last week of the month.
• Enter the name of one of the 12 months in
end-month:
English. You can enter the name of a day to change
the order of the display to
• Enter the number of the day. Range: 1 to 31.
end-day:
You can enter the name of a day to change the order
of the display to time day month year.
• Enter a four-digit number as the year.
end-year:
Range: 1993 to 2035.
• Enter the time in hours:minutes. For the
end-time:
hour variable, use the 24-hour format, example, 17:15
is 5:15 pm.
• (OPTIONAL) Enter the number of minutes to
offset:
add during the summer-time period. Range: 1 to1440.
Default: 60 minutes
time day month year.
System Time and Date | 607