Rip Configuration On Core 3 - Dell Force10 MXL Blade Configuration Manual

Figure 25-11. show ip protocols Command Example to Show RIP Configuration Activity on Core 2
Core2#show ip protocols
Routing Protocol is "RIP"
Sending updates every 30 seconds, next due in 17
Invalid after 180 seconds, hold down 180, flushed after 240
Output delay 8 milliseconds between packets
Automatic network summarization is in effect
Outgoing filter for all interfaces is
Incoming filter for all interfaces is
Default redistribution metric is
Default version control: receive version 2, send version 2
Interface
TenGigabitEthernet 2/42
TenGigabitEthernet 2/41
TenGigabitEthernet 2/31
TenGigabitEthernet 2/11
Routing for Networks:
10.300.10.0
10.200.10.0
10.11.20.0
10.11.10.0
Routing Information Sources:
Gateway
10.11.20.1
Distance: (default is 120)
Core2#

RIP Configuration on Core 3

Figure 25-12. RIP Configuration on Core 3
Core3(conf-if-te-3/21)#router rip
Core3(conf-router_rip)#version 2
Core3(conf-router_rip)#network 192.168.1.0
Core3(conf-router_rip)#network 192.168.2.0
Core3(conf-router_rip)#network 10.11.30.0
Core3(conf-router_rip)#network 10.11.20.0
Core3(conf-router_rip)#show config
!
router rip
network 10.0.0.0
network 192.168.1.0
network 192.168.2.0
version 2
Core3(conf-router_rip)#
1
Recv Send
2 2
2 2
2 2
2 2
Distance Last Update
120 00:00:12
Routing Information Protocol (RIP) | 447