Dell Force10 MXL Blade Configuration Manual page 253

Figure 13-25. show interfaces status Command Example
FTOS#show interfaces status
Port Description
Te 0/1
Te 0/2
Te 0/3
Te 0/4
Te 0/5
Te 0/6
Te 0/7
Te 0/8
Te 0/9
Te 0/10
Te 0/11
Te 0/12
Te 0/13
[output omitted]
In Figure 13-25, several ports display "Auto" in the Speed field, including port 0/1. In
speed of port 0/1 is set to 100 Mb and then its auto-negotiation is disabled.
Figure 13-26. Setting Port Speed Example
FTOS#configure
FTOS(conf)#interface tengig 0/1
FTOS(Interface 0/1)#speed 100
FTOS(Interface 0/1)#duplex full
FTOS(Interface 0/1)#no negotiation auto
FTOS(Interface 0/1)#show config
!
interface TenGigabitEthernet 0/1
no ip address
speed 100
duplex full
no shutdown
Status Speed Duplex Vlan
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
Down Auto Auto
--
--
--
--
--
--
--
--
--
--
--
--
--
Figure 13-26, the
Interfaces | 251