Dell Force10 MXL Blade Configuration Manual page 661

FTOS Behavior: When you remove a buffer-profile using the
CONFIGURATION mode, the buffer-profile name still appears in the output of
.
summary]
After a stack unit is reset, the buffer profile correctly returns to the default values, but the profile name
remains. Remove it from the
[fp-uplink |csf] stack-unit port-set buffer-policy
command from INTERFACE mode.
buffer-policy
Display the allocations for any buffer profile using the
buffer profile using the
(Figure 39-8).
Figure 39-8. Display the Default Buffer Profile
FTOS#show buffer-profile detail interface tengigabitethernet 0/1
Interface Tengig 0/1
Buffer-profile -
Dynamic buffer 194.88 (Kilobytes)
Queue# Dedicated Buffer
(Kilobytes)
0 2.50
1 2.50
2 2.50
3 2.50
4 9.38
5 9.38
6 9.38
7 9.38
show buffer-profile [detail | summary]
command from CONFIGURATION mode and the
show buffer-profile {summary | detail}
Buffer Packets
256
256
256
256
256
256
256
256
no buffer-profile [fp | csf]
command output by using the
commands in Figure
show
command from EXEC Privilege mode
command from
show buffer-profile [detail |
no buffer
no
39-9. Display the default
Debugging and Diagnostics | 659