To set a privilege level for a user:
Task
Configure a privilege level for a user.
Apply a Privilege Level to a Terminal Line
To set a privilege level for a terminal line:
Task
Configure a privilege level for a terminal line.
Note: When you assign a privilege level between 2 and 15, access to the system begins at EXEC mode,
but the prompt is hostname#, rather than hostname>.
Configure Logging
FTOS tracks changes in the system using event and error messages. By default, FTOS logs these messages
on:
•
the internal buffer
•
console and terminal lines
•
any configured syslog servers
Log Messages in the Internal Buffer
All error messages, except those beginning with %BOOTUP (Message), are logged in the internal buffer.
Message 1 BootUp Events
%BOOTUP:RPM0:CP %PORTPIPE-INIT-SUCCESS: Portpipe 0 enabled
Configuration Task List for System Log Management
The following sections include the configuration tasks for system log management:
•
Disable System Logging
•
Send System Messages to a Syslog Server
Command Syntax
username username privilege level
Command Syntax
privilege level level
Command Mode
CONFIGURATION
Command Mode
LINE
Management | 55