Troubleshooting A Switch Stack; Troubleshooting Commands - Dell Force10 MXL Blade Configuration Manual

Troubleshooting a Switch Stack

Troubleshooting Commands

To perform troubleshooting operations on a switch stack, use the commands in
switch.
Table 31-3. Troubleshooting Stack Commands
Command
show system stack-ports
(Figure
show redundancy
show hardware stack-unit
port-number (Figure 31-15)
clear hardware stack-unit
Figure 31-15. show system stack-ports Command Example
FTOS# show system stack-ports
Topology: Ring
Interface
0/41
0/45
1/41
1/45
2/41
2/45
(Figure 31-15)
31-16)
unit-number stack-port
unit-number
counters
Connection Link Speed
(Gb/s)
2/45 40
1/41 40
0/45 40
2/41 40
1/45 40
0/41 40
Output
Displays the status of stacked ports on stack units.
Displays the master standby unit status, failover configuration,
and result of the last master-standby synchronization; allows you
to verify the readiness for a stack failover.
Displays input and output flow statistics on a stacked port.
Clears statistics on the specified stack unit. Valid stack-unit
numbers: 0 to 5.
Admin Link
Status Status
up up
up up
up up
up up
up up
up up
Table 31-3 on the master
Trunk
Group
Stacking | 565