Dell Force10 MXL Blade Configuration Manual page 172

To display DHCP client information, enter the following show commands:
Task
Display statistics about DHCP client interfaces
(Figure 9-6).
Clear DHCP client statistics on a specified or on all
interfaces.
Display lease information about the dynamic IP address
currently assigned to a DHCP client interface
Figure 9-6. show ip dhcp client statistics
FTOS# show ip dhcp client statistics interface tengigabitethernet 0/1
Message
DHCPOFFER
DHCPACK
DHCPNAK
Message
DHCPDISCOVER
DHCPREQUEST
DHCPDECLINE
DHCPRELEASE
DHCPREBIND
DHCPRENEW
Figure 9-7. show ip dhcp lease
FTOS# show ip dhcp lease interface tengigabitethernet 4/37
Interface Lease-IP
====== =========
Te 4/37 189.17.9.2/30
Renew Time
==========
09-05-2023 04:56
170
| Dynamic Host Configuration Protocol (DHCP)
(Figure
Received
0
0
0
Sent
0
0
0
0
0
0
Def-Router
=========
0.0.0.0
Rebind Time
========
11-06-2034 13:46
Command Syntax
show ip dhcp client statistics
interface type slot/port
clear ip dhcp client statistics {all |
interface type slot/port}
show ip dhcp lease [interface type
slot/port]
9-7).
ServerId State
======== ======
189.17.9.1 BOUND
Command Mode
EXEC Privilege
EXEC Privilege
EXEC Privilege
Lease Obtnd At Lease Expires At
============== ===========
06-12-2012 07:35 01-18-2038 11:14