Dell Force10 MXL Blade Configuration Manual page 514

To confirm that extended information packing is enabled, use the
information packing is enabled
Figure 29-5. Confirming that Extended sFlow is Enabled
FTOS#show sflow
sFlow services are enabled
Global default sampling rate: 4096
Global default counter polling interval: 15
Global extended information enabled: switch
1 collectors configured
Collector IP addr: 10.10.10.3, Agent IP addr: 10.10.0.0, UDP port: 6343
77 UDP packets exported
0 UDP packets dropped
165 sFlow samples collected
69 sFlow samples dropped due to sub-sampling
Stackunit 1 Port set 0 H/W sampling rate 8192
Tengig 1/16: configured rate 8192, actual rate 8192, sub-sampling rate 1
Tengig 1/17: configured rate 16384, actual rate 16384, sub-sampling rate 2
Stackunit 3 Port set 1 H/W sampling rate 16384
Tengig 3/40: configured rate 16384, actual rate 16384, sub-sampling rate 1
Figure 29-6
Figure 29-6. Confirming that Extended sFlow is Disabled
FTOS#show sflow
sFlow services are disabled
Global default sampling rate: 32768
Global default counter polling interval: 20
Global extended information enabled: none
0 collectors configured
0 UDP packets exported
0 UDP packets dropped
0 sFlow samples collected
0 sFlow samples dropped due to sub-sampling
512
| sFlow
(Figure
shows that none of the extended information is enabled.
29-5).
Indicates no Extended sFlow types
enabled.
to confirm that extended
show sflow
Extended sFlow settings
show all 3 types are enabled