Changing A Field Definition; Defining Bars In A Report - Avaya Call Management System Custom Reports

Defining the data for a custom report

Changing a field definition

To change a field definition:
1. On Screen Painter, place the cursor on the field you want to change, and select
Field .
The cursor returns to the field and rests on the last space of the field. The following
message is displayed on Screen Painter status line: Move cursor to define
opposite corner of field, press RETURN.
2. If needed, move the cursor using the arrow keys to either make the field longer or
shorter, and press
The Field window is displayed.
3. Overtype any data in fields you want to change, and select Save .
The Field window closes, Successful is displayed in Screen Painter status line,
and the cursor returns to the field you just changed.

Defining bars in a report

Note:
You may want a report to display data as bar graphs instead of numbers. Defining a bar or
bars in a report is similar to defining fields, except in the way you define the format. To
define a bar's format, you must specify the following items:
The position and length of the bar
The direction of the bar — horizontal or vertical
The thresholds that cause the bar to change color
The scale of the bar.
80 Avaya CMS Custom Reports
.
Return
You can define bars in a custom report only if you have purchased the CMS
Graphics feature. If you have not purchased the Graphics feature, the Bar
action list option is not available.