Moving A Block - Avaya Call Management System Custom Reports

Using Screen Painter editing tools
Erasing the block

Moving a block

Note:
To move a block:
1. On Screen Painter, place the cursor over one corner of the block, and select Move
block .
The cursor returns to its original position, and the following message is displayed on
the status line:
Move cursor to define opposite corner of block, press RETURN .
2. Move the cursor to the opposite corner of the block. The block should include all fields
and text you want to move.
The block you are defining becomes highlighted as you move the cursor. (See the
following figure.)
50 Avaya CMS Custom Reports
Prior to completing a block move, you can press to cancel the move.
Ctrl+c