Avaya Call Management System Custom Reports page 108

Defining the data for a custom report
Note:
time report was run — Select this option to display the time you ran the report. You
must also enter a time format with the appropriate punctuation.
You can use any of the following time formats:
2. Verify that the format of your date and time entries are acceptable by accessing the
help screen for both the date and time fields.
input variable — Select input variable to display data exactly as it is entered
in one of the fields on the Report Input window. You must also enter, in the
associated field, the variable name assigned to the report input field (on the Define
Input window).
current ACD — Select current ACD to display the number or name of the ACD
that was current when you ordered the report. You must also enter, in the
associated field, the number of characters, 1 to 20, that the ACD field should have.
If you have defined names in the Dictionary subsystem for your ACDs, then you
may want to enter 20 , since this is the maximum length for Dictionary names.
108 Avaya CMS Custom Reports
An example of combined formats would be the standard date format
mm/dd/yy . Or, you could enter just the day and month mm/dd .
HH
hh
mm
ss
HH:mm:ss
or
HH:mm
hh:mm:ssa
m
or
hh:mmam
The hour only, in military time (24-hour
clock).
The hour only, according to a 12-hour
clock.
The number of minutes after the hour
only.
The number of seconds into the
minute.
Military time, either to the second or to
the minute.
12-hour clock time, with AM or PM
attached, either up to the second or up
to the minute.