Avaya Call Management System Custom Reports page 136

Advanced report design
Note:
8. Complete the definition of the column by responding to the additional prompts that are
displayed. Which prompts are displayed and in what order depends upon the data type
you selected. The table below lists the possible prompts.
When you have responded to all of the prompts for the column, a new highlighted line
is displayed in the table, and the Add Name field is again displayed at the top of the
screen.
9. Repeat steps 6 through 8 for each column you want to add.
Prompts for INFORMIX data types
136 Avaya CMS Custom Reports
date-Time Not supported by CMS Custom Reports. However, it
is supported by INFORMIX.
You must type T in order to select date-Time.
A date-Time column allows you to specify a
database qualifier of year, month, day, hour, or
minute.
Interval Not supported by CMS Custom Reports. However, it
is supported by INFORMIX.
An interval column allows you to specify an interval
qualifier of year, month, day, hour, or minute.
Money Not supported by CMS Custom Reports. However, it
is supported by INFORMIX.
If your data will be dollars and cents, you should use
Decimal.
The additional prompts that are displayed differ depending on your selected
data type.
Prompt What to Do
PRECISION Select either Smallfloat or Float .
PRECISION is displayed for the Float type.
INDEX Enter y if you want to make the column an index.
INDEX is displayed for all types except Serial . A
column with the Serial data type automatically
becomes an index.
Make the column an index only if the column will be
used for row searches and the table will contain
more than 200 rows of data.