Editing A Report With Blocks - Avaya Call Management System Custom Reports

Using Screen Painter editing tools
If you want to copy another report design, clear the upper-left area by deleting or moving
any existing block of text and fields (see
repeat task 1
page 47).
Copy of a report design (Using Get copy)
Note:

Editing a report with blocks

A block is a rectangular area on Screen Painter that you define and use to quickly
rearrange fields and text. You can erase blocks, copy blocks, or move blocks.
You define a block with the cursor by marking two opposite corners of a rectangle. When
you define a block, CMS highlights the defined area. A block can contain a single character
of text, a single field or bar, several words of text, several fields/bars, a combination of
fields/bars and text, or a whole report design.
Note:
You can edit a report in blocks using the steps described in the following pages.
48 Avaya CMS Custom Reports
(Access the get copy window
If part of the report you are copying overlaps existing text or fields on Screen
Painter, CMS does not copy that part of the report to Screen Painter.
If a block includes any part of a field/bar, CMS automatically includes the
entire field in the block. You should therefore use care when deleting blocks
to avoid unintentionally deleting a field/bar.
Editing a report with blocks
on page 46) through task 5
on page 48). Then
(Verify the report on