Save The Field Definition - Avaya Call Management System Custom Reports

Time
(point in time)
Select Time (point in time) if the field expression will display a point in time (for
example, 10:34am ). Enter a time format with the appropriate punctuation.
You can use one of the following formats:

Save the field definition

Select the Save action list option.
The Field window closes, and Successful is displayed in Screen Painter's status line to
indicate the field definition has been added.
To define additional fields, repeat task 1
page 67) through task 6
Note:
HH
hh
mm
ss
HH:mm:ss
or
HH:mm
hh:mm:ssam
or
hh:mmam
(Save the field definition
You must assign a Row Search ID to the field before your field definition is
truly complete. When you do, the question mark (?) will change to that ID
number. See the " Defining the rows of data for a report
chapter.
The hour only, in military time (24-hour
clock). For example, 15 equals 3:00 p.m.
The hour only, according to a 12-hour
clock. For example, 3 could mean 3:00
a.m. or 3:00 p.m. For this reason, if you
use hh, you should also add am (hham).
The number of minutes after the hour only.
The number of seconds into the minute.
24-hour clock time, either to the second or
to the minute.
12-hour clock time, with AM or PM
attached, either up to the second or up to
the minute.
(Define the position and length of a field
on page 79).
Defining report fields
on
" section in this
Issue 3.0 May 2002 79