Table of Contents
Advertisement
Enter a report name
In the Report name field of the Get Copy window, enter the name of the report you want
to copy. You can copy standard report designs, global report designs, and private report
designs. However, you cannot copy another user's private report designs unless you are a
CMS administrator.
If you do not know the report name, first select List all . For List all , you can leave
the Report name blank, but you must select Standard or Custom in the Report type
field. After you List all , you can go back and enter the report name.
Note:
Enter a user ID
In the User ID field, enter a user ID only if one of the following is true:
You are a CMS administrator and you want to copy another user's private report.
You want to list only the custom reports of a specific user.
Select a report type
Enter x to select the Report type option (either standard or custom ) for the type
of report you want to copy. If the wrong option is selected, CMS may not find or copy the
report you actually want.
Verify the report
Select Find one to verify that the report is the one you want to copy.
The user ID is displayed in the User ID field and, if it exists, the report description is
displayed in the Description field.
Copy the report
Select Copy to copy the report's design to Screen Painter.
The Get Copy window is displayed and the report design is displayed on Screen Painter,
starting in the upper left corner.
Because of the need to shorten names of standard reports for this window,
the name you must enter in this window does not always match the exact
names of standard reports.
Copying an existing report design
Issue 3.0 May 2002
47
Advertisement
Table of Contents
