Table of Contents
Advertisement
Phase 2 real-time error codes
Phase 2 real-time error codes contains the real-time Database Manager error codes. Each
code includes a description of the error and a recommended solution.
These errors are reported in the following format:
CMS Database Manager error: <error number>
In addition, a circumflex (^) is displayed in the listed Select statements to mark the location
of an error.
Phase 2 real-time error codes
—1
—2
—3
—4
—5
—6
Description: A syntax error has occurred.
Solution: Check the select for misspelled keywords or keywords
that are out of order.
Description: An illegal character has been found in the select
statement.
Solution: Remove the illegal character (often a nonprintable
control character).
Description: The specified table name is invalid.
Solution: Check the spelling of the table name and check for
required commas in the From tables field.
Description: An invalid column has been specified (it is not found
in any of the specified tables).
Solution: Check the spelling of the column names.
Description: A mixture of aggregates and nonaggregates are
being selected, and this is not allowed in real-time reports. (This
error code can also mean mismatched types in comparison.)
Solution: Create two identical row search conditions, and apply
one to the aggregate columns and one to the nonaggregate
columns.
Description: Bad column in the order by clause.
Solution: Verify that the column name in the order by clause is
spelled correctly and that it is being selected by one of the fields
included in this row search.
Test Design Error Messages
Issue 3.0 May 2002
127
Advertisement
Table of Contents
