Avaya Call Management System Custom Reports page 81

The bar's legend
If you copy the design of an existing bar graph, the bars are displayed filled with X s, V s, or
H s.
X s indicate that the bar is discrete. The bar is displayed as a single bar in the report
because, based on the row search conditions assigned to the bar, CMS finds only
one value.
V s indicate that the bar is repeated vertically in the report. The bar is displayed as a
series of bars, one over the other, because, based on the row search conditions
assigned to the bar, CMS finds multiple values.
H s indicate that the bar is repeated horizontally in the report. The bar is displayed as
a series of bars, side by side, because, based on the row search conditions
assigned to the bar, CMS finds multiple values.
See Assign a row search ID to report fields and bars
discrete and repeated bars.
To define Bars in a report perfom the following instructions in the order indicated:
1. Define the position and length of a bar
2. Define the bar's data expression
3. Define the Tables for Calculation names
4. Define the bar direction
5. Define the bar scale
6. Define the maximum graph value
7. Define the first threshold
8. Define the second threshold
9. Select normal or reversed thresholds
10. Save the bar definition
Defining Bars in a report also includes the following topic:
Changing a bar definition
on page 82
on page 82
on page 83
on page 83
on page 83
on page 85
on page 85
on page 86
on page 86
on page 87
on page 88
Defining bars in a report
on page 101 for illustrations of
Issue 3.0 May 2002 81